New Electrostatic Discharge Simulator ESS-B3011/ESS-L1611/GT-30R

EN/IEC 61000-4-2 Ed2 & ISO 10605 Ed2 Compliant

Cost-oriented Basic ESD simulator

Product catalog

ESD Simulator Model ESS-B3011

ESS-B3011&GT30R

(Note: Discharge gun stand is an optional accessory.)

FEATURES

EN/IEC 61000-4-2 Ed2 Compliant (B3011/L1611)
ISO 10605 Ed2 Compliant (B3011/L1611) (Note: Optional gun head and CR units are required.)
"3 pre-checking function" taking the confirmable test into the account (B3011/L1611)
"Discharge detecting function" to realize the air-discharge confirmation (B3011/L1611)
"Lightest Discharge Gun in the market "to lighten the continuous operation (GT-30R)
"White LED Irradiator" to facilitate the visualization of the discharging point (GT-30R)

SPECIFICATIONS

ESD Simulator Main Unit Model : ESS-B3011/L1611

Items	ESS-B3011 specifications	ESS-L1611 specifications
Polarity	Positive or Negative
Output voltage	0.2 to 30.0kV +/-5% (30.5kV maximum) 0.2 to 10kV: 0.05kV step 10.0 to 30.5kV: 0.10kV step	0.2 to 16.0kV +/-5% 0.2 to 10kV: 0.05kV step 10.0 to 16.0kV: 0.10kV step
Repetition cycle	0.05 to 99.9s (+/- 10%) /Manual 0.05 to 10.0s: 0.05s step 10.0 to 99.9s: 0.10s step
No. of time of discharge	1 to 999 times /continuous
Discharge mode	Contact discharge/ Air discharge
Trigger mode	Gun trigger / Main unit trigger
Operation panel	Indicator: 5x7 dot matrix LED Operation: Push-buttons (Partially lighting)
Radiation mode select switch	Extra / Normal switching function built-in
Discharge detection	Discharge detection function in air-discharge mode
Pre-checking function	High voltage output checking (by user operation. Not the calibration but just checking)
CR & Gun head checking	CR constant and gun head recognizable (with an indicator to prevent the wrong combination)
IEC level switching function	Contact discharge mode: 2.0, 4.0, 6.0, 8.0 kV step Air discharge mode: 2.0, 4.0, 8.0, 15.0 kV step
Warning lamp	Lights up while the HV circuitry is on. Blinks while discharges are in progress.
Charging capacitor and resistance	150pF+/-10%, 330 ohm +/-10% (built into Discharge Gun GT-30R)
Main unit charging resistance	10M ohm (53Mohm for combination with Discharge Gun GT-30R)
Power supply/ Power consumption	100 to 240V AC 50/60 Hz +/-10% 62VA
Included accessories	Instruction manual
Dimensions and weight	(W)270 X (H)263 X (D)200 mm (projection excluded) Approx. 4.6 kg

Discharge Gun Model : GT-30R

Items		GT-30R specifications
Output voltage		30.5kV Max
Polarity		Positive or Negative
Repetition cycle		0.05s and over Note) Guaranteed value is 0.1s and over (330pF and under)
Discharge mode		Contact or Air
Charging resistor		Built-in CR unit
Charge/Discharge capacitor & Discharge resistor		Built-in CR unit
High voltage connector		Composite connector of high voltage and signal line (male) （NoiseKen custom)
Operation switch		Discharge trigger
LED irradiator		White LED light built-in for irradiating EUT （Focusing point is the tip)
Included accessories		CR unit (150pf-330 ohm) 06-00073A Conical discharge tip 12-00007A Round discharge tip 12-00008A Instruction manual
Dimensions and weight		(W)83 X (H)217 X (D)229 mm (projection excluded) Approx. 0.8kg (Cable and connector excluded) Approx. 10.8kg (Cable included, connector excluded)